IT 1402 MOBILE COMPUTING
QUESTION BANK
Two Marks Questions:
- Define the relation between the data rate and bandwidth. What has harmonics to do with bandwidth?
- Define channel capacity in terms of Nyquist a criteria and Shannon’s formula.
- Define an equation for free space loss in terms of db.
- What is ISI?
- List the parameters of GSM and IS – 95 system.
- What do you understand by co channel interference and adjacent channel interference.
7.What factors influence the choice of digital
modulation technique
8.What is soft and hard handoff?
9.What is meant by
Coherent Bandwidth
10.What is
meant by Coherent Time.
11.List and
briefly describe different Media Access Mechanisms of Mobile Systems.
12.Describe
the services provided by GSM network.
13.What is
authentication and how it is carried out.
Four marks questions:
1.
If the spectrum of the channel is between 3 MHz and 4MHz and SNR in db = 24 db,
then find the channel capacity using Shannon’s formula and based on Nyquist
formula how many signaling levels are required
to have to reach the given
channel capacity.?
2.
List modulation
technique that are synchronous and asynchronous? Briefly explain variants of Phase Shift
Keying with suitable diagrams
3.
Given a channel with an intended capacity of 20 Mbps,
the bandwidth of the channel is 3 MHz.
What signal to noise ratio is required to achieve this capacity?
4.
What is Eb / No
? How it is related to BER (Bit Error Rate)
5.
Briefly describe multi path propagation mechanism in mobile
communication. What are its effects
6.
Given a channel with an intended capacity of 20 Mbps,
the bandwidth of the channel is 3 MHz.
What is the signal to noise
required to achieve this capacity?
7.
Briefly explain the concept of spread spectrum with a
neat diagram. How spread spectrum
overcomes narrowband interference?
8.
What is near and far field effect?
9.
What are hidden and exposed terminals? What is CSMA/CA?
How does prevent collision? What are its draw backs?
10. List
and explain various mobile services of GSM?
11. What
are Traffic channel and control channel?
12. Define
the following:
a.
MSISDN
b.
IMSI
c.
TMSI
d.
MSRN
13.How
authentication is carried out in GSM?
14. How privacy
is provided inGSM?
Eight Marks questions:
1. What is channel capacity? How Nyquist and Shannon relate the channel
capacity with bandwidth and hence with
bit rate? How multiplexing is important in communication? List and
briefly explain different types of multiplexing mechanism giving there
advantages and disadvantages.
2. Suppose a transmitter produces 50 watts of power.
- Express the transmitter in units of dbm and dbw.
- If the transmitter’s power is applied to a un ity gain antenna with a 900 MHz carrier frequency, what is the received power in dbm at a free space distance of 100 m.
- Repeat (b) for a distance of 10 km.
- Repeat (c) but assume a receiver antenna gain of 2.
3. What is fading? What are its classifications? Briefly
describe them all by bringing out
their salient feature.
4.
Briefly describe FHSS and DSSS with neat diagrams.
5. Draw and describe the system architecture of GSM
System.
6. What is radio interface? How it is made up of in GSM?
7. List and discuss various control channels in GSM
8. Draw and describe protocol architecture of GSM
9. How localization of a subscriber is carried out in GSM
10. What is
‘handover’ in mobile system? How it is effected in GSM?
Twelve Marks
questions:
- Briefly describe DAMA, PRMA, MACA, CDMA
- Explain the term interference in the space, time, frequency and code domain. What are the countermeasures in SDMA, TDMA,FDMA and CDMA systems?
- How security is provided in GSM for the subscribers?
IT1402 MOBILE COMPUTING 3 0
0 100
AIM
To provide basics for various techniques in Mobile
Communications and Mobile Content services.
OBJECTIVES
·
To learn the basics of Wireless voice and data communications
technologies.
·
To build working knowledge on various telephone and satellite networks.
·
To study the working principles of wireless LAN and its standards.
·
To build knowledge on various Mobile Computing algorithms.
·
To build skills in working with Wireless application Protocols to
develop mobile content applications.
UNIT I WIRELESS COMMUNICATION FUNDAMENTALS 9
Introduction – Wireless
transmission – Frequencies for radio transmission – Signals – Antennas – Signal
Propagation – Multiplexing – Modulations – Spread spectrum – MAC – SDMA – FDMA
– TDMA – CDMA – Cellular Wireless Networks.
UNIT II TELECOMMUNICATION NETWORKS 11
Telecommunication
systems – GSM – GPRS – DECT – UMTS – IMT-2000 – Satellite Networks - Basics
– Parameters and Configurations – Capacity Allocation – FAMA and DAMA –
Broadcast Systems – DAB - DVB.
UNIT III WIRLESS LAN 9
Wireless LAN – IEEE 802.11 -
Architecture – services – MAC – Physical layer – IEEE 802.11a - 802.11b
standards – HIPERLAN – Blue Tooth.
UNIT IV MOBILE
NETWORK LAYER 9
Mobile IP – Dynamic Host Configuration Protocol - Routing –
DSDV – DSR – Alternative Metrics.
UNIT V TRANSPORT
AND APPLICATION LAYERS 7
Traditional TCP – Classical TCP improvements – WAP, WAP
2.0.
TOTAL : 45
TEXT BOOKS
1.
Jochen Schiller, “Mobile
Communications”, PHI/Pearson Education, Second Edition, 2003. (Unit I Chap 1,2
&3- Unit II chap 4,5 &6-Unit III Chap 7.Unit IV Chap 8- Unit V Chap
9&10.)
2.
William Stallings, “Wireless Communications and Networks”, PHI/Pearson
Education, 2002. (Unit I Chapter – 7&10-Unit II Chap 9)
REFERENCES
1.
Kaveh Pahlavan, Prasanth Krishnamoorthy, “Principles
of Wireless Networks”, PHI/Pearson Education, 2003.
2.
Uwe Hansmann, Lothar Merk, Martin S. Nicklons and Thomas Stober,
“Principles of Mobile Computing”, Springer, New York, 2003.
3.
Hazysztof Wesolowshi, “Mobile
Communication Systems”, John Wiley and Sons Ltd, 2002.
** Only highlighted portion to be included for first unit test.
ANNA UNIVERSITY
B.E/B.TECH. DEGREE EXAMINATIONS: NOV/DEC 2011
REGULATIONS: 2008
SEVENTH SEMESTER: INFORMATION TECHNOLOGY
080250043- MOBILE COMPUTING
Time: 3 Hours Max Marks: 100
Part –A
(10×2=20 Marks)
ANSWER ALL THE QUESTIONS
1. List the limitations of mobile computing.2. Give the name of any four mobile communication protocols.
3. What is meant by exposed terminal problem?
4. Define cellular networks.
5. Write about tunnelling in Mobile Communications?
6. Define Multicasting.
7. List the features of Windows CE operating systems.
8. What is meant by timeout freezing?
9. Define middleware.
10. What is meant by clustering?
Part –B
(5×16=80 Marks)
ANSWER ALL THE QUESTIONS
11. (a)(i) Explain the various types of switching techniques. (6)(ii) Give the detailed discussion of various multiplexing techniques with example. (10)
(OR)
(b)(i) Give the discussion of mobile system networks. (8)(ii) Explain GSM architecture with appropriate diagram. (8)
12. (a)(i) Discuss the main features of spread spectrum. (8)
(ii) Explain the frequency management and channel assignment in cellular networks. (8)
(OR)
(b) Explain the need of coding techniques. Give the detailed discussion of various coding techniques used in CSMA.13. (a)(i) Discuss the route optimization techniques in mobile network layer. (8)
(ii) Write about DHCP protocol and its functions. (8)
(OR)
(b) Give the detailed discussion of handover management and location management in mobile IP network layer.14. (a) Explain four methods used for congestion control in mobile transport layer.
(OR)
(b) Explain the following(i) Indirect TCP. (8)
(ii) Snooping TCP. (8)
15. (a) Explain the mobile agent architecture with appropriate diagram.
(OR)
(b) Give the detailed discussion of energy efficient communication methods used in wireless networks.***** ALL THE BEST *****
This blog contains more useful information, thanks for this blog...
ReplyDeleteBest Soft Skills Training In Chennai
Online Soft Skills Training Courses